Crane EE-7272 Manuel d'utilisateur télécharger pdf (Page 8)

4

Whether for residential building or

industrial, for small or large building

sites, the TRIO wall formwork system

is adaptable and versatile. These

assembly instructions are provided to

ensure its problem-free use. They

show the basic TRIO system, with

formwork heights h = 270 and h = 330,

and its usage, with add-on systems

and safety features. At the end you

will find out something about the care

of the product.

The identification of the components

is made without the addition of “TRIO.

Measurements without units are given

in cm.

The individual parts of the system

h = 270 are shown in Part F with their

item numbers. Please refer to your

PERI specialist if you have any

questions.

Introduction

For all applications, the relevant

additional parts and tables are

available.

TRIO L

(aluminium powder coated in yellow)

can be combined as required with

TRIO 270.

TRIO 330

For office buildings and industrial

construction.

TRIO Structure

For components with special

demands on the surface.

Tie system DW 15 and DW 20

These assembly instructions contain

information on the handling and correct

use of the TRIO formwork system.

Safety instructions and load instructions

must be adhered to exactly.

For other uses, or use beyond that

described, it is necessary to obtain

our specific agreement and additional

construction instructions from the

operator.

The operator must ensure that the

construction and use instructions

delivered by PERI are present and

available for the workers.

Fundamentally, only materials in good

condition may be used. Damaged

components must be changed.

For the use of our products, the most

recent safety and environmental

regulations applicable to the respective

countries must be adhered to.

The assembly instructions and the

PERI offer and implementation plans

do not replace the working and

assembly instructions from the

operator on the building site.

Correct use

Product features

The TRIO 270 wall formwork system

is a heavy formwork for shuttering

walls, pillars, foundations and other

concrete components.

The basic equipment includes the

panels, corner and filler elements,

alignment couplers, compensation

waler, push-pull props, work platforms

and all the necessary small parts for

assembly. The steel parts are powder

coated in red.

Shuttering is carried out with 5 element

heights and 6 widths in a grid size of

30 cm. The elements can be used

upright or on their sides.

With TRIO it is possible to fulfil the

flatness requirements of DIN 18202

up to line 7 of table 3. See GSV table

part E.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 79 80

Commentaires sur ces manuels

Pas de commentaire